Concrete Staining

Houston TX Concrete Staining

What is Concrete Staining?

To simplify the answer to this question, I’m going to break down concrete stains into two families: reactive and non-reactive. With a reactive stain, a reaction takes place between the stain and concrete, forming a permanent chemical bond. Non-reactive stains are tinted coatings, sealers, or dyes that mechanically, not chemically, bond to the concrete surface. Instead, they fill the pores of the concrete surface or produce a colored film or coating.

While reactive stains are available with either an acid base or salt base, acid-based stains have been around the longest and are the measure by which all other stains are gauged. True acid-based stains are made up of inorganic metallic salts dissolved in an acid and water solution. However, Mother Nature limits the color palette for acid stains. That’s why most manufacturers offer only eight colors, mostly earth tones. A true reactive acid-based concrete stain is translucent, penetrates into the concrete surface, and leaves no film or coating.

Non-reactive stains have grown in popularity over the last few years because they offer a nearly unlimited palette of colors and are easy to apply. The downside is that they lack the deep, rich, translucent color tones only possible with acid stains.

While both stain types are viable options for the staining professional, it’s important to be aware that each product requires different procedures for surface preparation. Most non-reactive stains require an acid wash to open and prepare the surface to ensure good mechanical adhesion. Surface preparation for a true concrete stain will NEVER recommend an aggressive acid wash to open the surface prior to application. Applying an aggressive acid (such as hydrochloric or muriatic) destroys the cement paste at the surface that allows the acid stain to react and develop its marbled color variations. A hard-troweled concrete surface, rich in cement paste, is the food on which a true acid-based stain thrives.

 

 

Houston TX Concrete Staining - Commercial

Stains for concrete come in two general categories: acid-based chemical stains and water-based acrylics. Most acid stains are a mixture of water, hydrochloric acid and acid-soluble metallic salts. They work by penetrating the surface and reacting chemically with the hydrated lime (calcium hydroxide) in the concrete. The acid in the stain lightly etches the surface, allowing the metallic salts to penetrate more easily. Once the stain reacts, it becomes a permanent part of the concrete and won't fade, chip off or peel away. The palette for acid-etch staining is generally limited to earthy tones, such as tans, browns, terra cottas and soft blue-greens.

Houston TX Concrete Staining

Houston TX Concrete Staining - Residential

Staining imparts a luxurious richness that can't be achieved by any other coloring medium. Rather than produce a solid, opaque effect like paint, stains permeate the concrete to infuse it with luminous, translucent tones that vary depending on the surface they are applied to and the application techniques used. The results can mimic everything from polished marble to tanned leather to natural stone or even stained wood.

Schedule your Concrete Staining estimate today!